TWISTEE Saddle


Sewer Saddle

TWISTEE Saddle

  • Connects to solid walled main sewers from DN 300
  • Standard core drill size of 200mm
  • Versatile - will connect to any DN 150 lateral pipe
  • Resistant to shear and vertical loads resulting from differential settlement
  • Resistant to 0.6 bar hydrostatic preussure

Sewer Saddle TWISTEE® - for connecting lateral pipes to solid walled main sewers

As the Sewer Saddle TWISTEE® DN 150 has been designed with a spigot, it offers the possibility to connect to any DN 150 lateral pipe material.

For main sewers DN 300 and above with a minimum wall thickness of 60 mm.

 

PHONE Sales & Technical-Team
+49 2234 928 03-0
Description
TWISTEE Saddle
Technical Specification

Sewer Saddle TWISTEE® for connecting lateral pipes to solid walled main sewers from DN 300 with a minimum wall thickness of 60 mm.

Manufacturer:

MÜCHER DICHTUNGEN®, D-50226 Frechen, T +49 2234 928 03-0, F -55

Pressure Tightness:

0.6 bar Water / -0,3 bar vacuum

Jetting Resistance:

170 bar

Sealing Material:

EPDM rubber according to DIN EN 681-1

Temperature Resistance:

-40°C to +120°C, temporary max. temperature +160°C

Standard/Approval:

DIN EN 14758-1, DIN EN 681-1, CE18, DIBt-Approval applied for
  • 1. Drill a clean hole using a core drill. For reinforced concrete pipes apply corrosion protection liquid on the inside wall of the hole.
    1. Drill a clean hole using a core drill. For reinforced concrete pipes apply corrosion protection liquid on the inside wall of the hole.
  • 2. Insert TWISTEE® gasket considering flow direction and apply the lubricant on the thread.
    2. Insert TWISTEE® gasket considering flow direction and apply the lubricant on the thread.
  • 3. Screw the TWISTEE® spigot into the gasket using the strap wrench.
    3. Screw the TWISTEE® spigot into the gasket using the strap wrench.
TitleFormatSize 
Datenblatt (PDF)pdf118.74 KBDownload
Musterleistungsverzeichnis (DOCX)doc167.00 KBDownload
Musterleistungsverzeichnis (GAEB-90)csv549.00 BDownload